Asphalt is a popular pavement material for multiple reasons, including aesthetics, viability, affordability, and many more. But you might have seen the edges of your asphalt crumbling and water washing away the mulch every time it rains, leaving you in despair for choosing asphalt over concrete.
A simple solution to get rid of all maintenance hassle? Asphalt driveway edging. While most of you may be familiar with the term, it protects the driveway’s vulnerable edges from splitting or eroding before time. Besides this, the whole edging process is easy and not too heavy on the pockets.
If extreme weather conditions or vehicle load has damaged your driveway, let C.H. Paving & Sealcoating kindle life in it. Our expert paving contractors first inspect the asphalt and then define suitable maintenance requirements and schedule.
Click here to repair your driveway in Blairstown, NJ today to prevent further deterioration. Trust us; we can make your driveway clean and clear of any damages in no time!
Are you still thinking about whether to consider driveway edging? Let these three benefits convince you to take immediate action. Later, we discuss how an asphalt driveway can be edged efficiently.
Benefits Of Asphalt Driveway Edging
- Driveway Protection
You might not know, but edging helps preserve your driveway foundation. It is made from brick or stones to keep the pavers in place and protect the asphalt from getting chipped or cracked.
Moreover, edging also restricts grass or tree roots’ growth since it is set several inches into the ground.
- Less Maintenance
Since you cannot stop the asphalt from wearing away, edging can decrease the maintenance runs by a significant amount. Not only that but it also a great way to save time, aggravation end effort.
Otherwise, you will continually need to hoe or shovel the edge of your driveway to keep it in optimal condition.
- Increases Home Value
If not today, you might plan to sell your property at some point in your life. And since the exterior is one of the things that attract a customer, edging the driveway is undoubtedly going to increase the chances of a sale.
Know that driveway edging is an inexpensive yet practical way to enhance the curb appeal of your property.
Now that you are aware of driveway edging’s benefits, here is how you can do it.
Step By Step Driveway Edging
After marking the driveway edges, dig a trench of 1 foot wide and 8 inches deep. If your driveway has a slope, ensure starting from the top and work downhill.
- Edge Clearing
Next, make a line with chalk just at the inside edge of the driveway to make the area for clearing. Here, you need to clean the edges and carefully trim the soil underneath the asphalt surface before setting in the edging blocks.
- Stake A Line
In this step, you need to drive two stakes, not more than 50 feet apart in width, at the driveway’s edge. Also, when placed, the edging block should only be half visible and not more than that.
- Set The Bricks And Level the Tops
Once the ground is leveled and ready, take one block at a time and start placing them in the trench from the beginning. With a rubber mallet, tap the top of the edged blocks until it is completely fixed in the surface.
At the corner of the driveway, where blocks don’t fix well, you may need to trim the block’s corners. Once done, ensure cleaning the edges for dirt and fill the gap with appropriate aggregates to give the driveway edges a finished look.
Are you ready to perform driveway maintenance before laying the edging blocks? Click here to connect with C.H. Paving & Sealcoating‘s expert pavers to do the job for you. We offer practical and budget-friendly solutions for all residing in Blairstown, NJ.